Battery for Milwaukee M18 6,0 Ah 6000 mAh 18V
Battery for Milwaukee M18 6,0 Ah 6000 mAh 18V
Battery for Milwaukee M18 6,0 Ah 6000 mAh 18V
Battery for Milwaukee M18 6,0 Ah 6000 mAh 18V
Battery for Milwaukee M18 6,0 Ah 6000 mAh 18V
Battery for Milwaukee M18 6,0 Ah 6000 mAh 18V
Battery for Milwaukee M18 6,0 Ah 6000 mAh 18V
Battery for Milwaukee M18 6,0 Ah 6000 mAh 18V

Battery for Milwaukee M18 6,0 Ah 6000 mAh 18V

Index:

EAN:

 High-quality cells from the best suppliers

 Compatible with a wide range of tools

 High performance in all conditions

 12-month warranty

zł154.47

154.47 tax excl.

Applied cells

Original Samsung INR21700-30T cells (3000 mAh, high-drain) provide stable power even under heavy load.

Thanks to the use of Samsung high-discharge cells, we are the only manufacturer to offer a quality guarantee! We are confident in our products and are not afraid of potential warranty repairs. We have the knowledge, equipment and all necessary components for the production and servicing of the batteries we offer.

Samsung 40T cells
Nickel tabs

Moisture protection

The electronic board is coated with a protective layer that shields it from moisture and dust, significantly extending the battery’s lifespan.

We use professional insulation solutions that ensure safety even in demanding working conditions.

Charge indicator

The built-in LED indicator allows you to quickly check the energy level and plan your work without unexpected interruptions.

Battery pack

Compatible models

◾ 0880-20 ◾ 2601 ◾ 2601-22 ◾ 2601-M18 ◾ 2610 ◾ 2611 ◾ 2611-84 ◾ 2611-M18 ◾ 2620 ◾ 2620-20 ◾ 2620-M18 ◾ 2630 ◾ 2630- M18 ◾ 2630-20 ◾ 2630-22 ◾ 2650 ◾ 2650-20 ◾ 2650-21 ◾ 2650-22 ◾ 2650-M18 ◾ 49-24-0171 ◾ 49-24-0171-M18 ◾ C12-28 DCR ◾ C18 HZ ◾ C18 IW ◾ C18 WL ◾ HD18 AG ◾ HD18 BS ◾ HD18 CS ◾ HD18 H ◾ HD18 HX ◾ HD18 MS ◾ HD18 PD ◾ HD18 SG ◾ HD18 SX ◾ M18 ◾ M18 BH ◾ M18 BID ◾ M18 BIW12 ◾ M18 BPD ◾ M18 CAG115X ◾ M18 CDD ◾ M18 CDD-22C ◾ M18 CHIWF34 ◾ M18 CID ◾ M18 CPD ◾ M18 CPD-22C ◾ M18 CPD-32C ◾ M18 CSX ◾

Battery capacity
3000mAh
Cell type
Litowo-jonowe
Cell brand
Samsung
Number of cells
10
Condition
New
Warranty
12 months
Producent
3000mAh
Lupo sp. z o.o.

1) The accurate working temperature
Batteries suffer very badly at extreme temperatures. If you want to extend the life of your battery, you should avoid overloading it too much. If your battery works for a very long time, that's why it is probably very hot. It is wise to pull it out of the device and wait 10-15 minutes until it cools down.

2) Battery overcharge
If you want your batteries to have a very long life, you should also avoid their deep discharge. If during daily work on the battery you see a fairly large decrease in the efficiency of the device powered by the battery, you should stop its work as soon as possible and connect the battery to the charger.

3) Battery rest
You must also remember that the discharged battery for proper operation needs about 5 minutes of "free charging" before connecting to ”normal” charging. During "free charging" our battery temperature will drop significantly which will obviously have a very beneficial effect during subsequent charging.

4) Appropriate storage of the battery
The life of batteries is also greatly influenced by their proper storage. If you are not going to use the battery in the near future, it is worth charging it for the level 60-70%. Charged battery should be put in a safe place with temperature above zero.

5) Battery formatting
If you have batteries based on popular NiCd cells, you should also remember that it is possible that the so-called "memory effect" may occur. Batteries with NiCd cells should be discharged at least once every three cycles, and then charged to 100% level. Through these actions you will keep the maximum capacity of the battery.

Frequently asked questions... and answers :-)

If my previous battery was NiCd and now I have NiMh, will my old charger work properly?
Batteries that have been built on both NiCD and NiMh cells can work in the same voltage ranges. They also have the same charging current. Thus practically every NiCd charger can also operate a NiMh battery. In case of any questions or doubts about the charger or batteries, please contact our customer service department.

Is it necessary to remove the battery from the device each time after work is completed?
Warto pamiętać, iż jeżeli nasz akumulator nie jest aktualnie używany, może pozostać w urządzeniu. Należy przy tym mieć świadomość, iż pozostawiając go tam na dłużej, może się rozładować. Dlatego istotne jest, aby naładować go do minimum 60%, jeżeli nie chcemy aby uległ rozładowaniu.

Guaranteed battery life
The guaranteed operating time on a given battery depends on the battery load at a given time. For example, if you use a battery for screwdriving, you will need less energy for this than, when working with a chain saw, and therefore, the operating time may be longer. Unfortunately, power tool such as chainsaws have a current flow of more than 25A, so the working time is shorter.

What is the difference between NiCd and NiMh batteries?
Newer models are NiMh cells. Their main advantage is the fact that they have a higher energy density as well as the lack of memory effect. Thus, in contrast to NiCd batteries, a newer model can be recharged at any time, without losing capacity.

If the purchase battery does not match my power tool, can I return it?
We have been selling on the Internet for many years, for this reason situations like this are not new to us. Thus, in order to meet the expectations of our customers and not to cause them any problems, anyone who has bought a product from us can return it within 14 days from the date of purchase.

Reviews

No reviews

16 other products in the same category:

Viewed products

This site uses cookies to deliver services in accordance with the Privacy Policy .
You can specify the conditions for storage or access of cookies in your browser.